December 14, 2011
The only utility power company in Mexico uses FreeWave wireless data radios for monitoring and control of critical electric power applications
BOULDER, Colo., Dec. 14, 2011 — FreeWave Technologies, (http://www.freewave.com), manufacturer of the most reliable, high-performance spread spectrum and licensed radios for critical data transmission, was chosen by Comision Federal de Electricidad (CFE) (http://www.cfe.gob.mx) for wireless data radio applications such as power consumption and substation monitoring, as well as control and monitoring of power networks.
CFE is the only electric power utility company in México. It generates, transmits and distributes power and energy to nearly 100 million customers and is one of the largest utility organizations in the world with approximately 100,000 employees around the country. It currently is using FreeWave’s FGR2-PE, FGR115-RC and HTPlus wireless data radios in nine of the 16 divisions throughout Mexico.
“Before implementing FreeWave radios, CFE was experiencing difficulties due to distance and maintaining line of site in its communication networks,” said Federico Ibarra Otero, engineer at Ampere, FreeWave’s reseller partner in Mexico. “There were some locations where the monitoring devices were remotely located and required repeaters. FreeWave offered a solution that tackled both the distance and line of sight issues and we have achieved more consistent, reliable and modern links since implementation.”
FreeWave radios are used for Supervisory Control and Data Acquisition (SCADA) applications to monitor and control switch gears, reclosers and power meters. Some of the networks are installed in heavily populated cities, such as Mexico City, Monterrey and Guadalajara, where the RF noise and line of sight can potentially cause major issues with wireless communications. However, with FreeWave’s excellent network design and flexibility, the radios achieve optimal communication, even with skyscrapers, tree coverage and high RF noise levels. With CFE being the only energy provider of power for the entire country, FreeWave radios also were relied upon for data transmission in a wide range of geographical areas, spanning from the big cities to remote locations in the mountains and desert. Additionally, each FreeWave radio is 100 percent tested for RF performance — from -40° C to +75° C — to ensure reliability in a variety of weather conditions.
“We are very satisfied with FreeWave’s Ethernet models, the FGR2-PE and HTPlus, as they let us manage serial and Ethernet devices at the same time,” said Mario Granados Villareal, engineer at CFE. “This allows us to incorporate all the data coming from the radios to the LAN networks, which not only saves time, but allows our entire communications network to operate seamlessly.”
The FGR2-PE offers users a second, switched Ethernet port as well as two serial ports that give customers the ability to transition from serial to Ethernet data communication without having to replace their wireless communication hardware down the road, as well as operate both serial and Ethernet communication independently and simultaneously on the same platform. The FreeWave HTPlus Ethernet radio is ideal for customers who need an industrial grade high-speed Ethernet radio that operates in harsh environments and noisy RF conditions. It delivers data at a rate of up to 867 Kbps and is an ideal radio for SCADA backhaul networks.
“We are proud to have been chosen by CFE for this significant project. The success with CFE confirms that our wireless solutions are making progress across the globe in the smart grid market,” said Ashish Sharma, chief marketing officer at FreeWave Technologies. “Our industrial radios provide enhanced capabilities for smart grid applications, such as distribution automation (DA), AMI back haul, distribution management (DMS), substation automation (SSA), load management (LM), demand response (DR), supervisory control and data acquisition (SCADA), and energy management (EMS). Our feature rich radio solutions coupled with top-notch customer support will bring new efficiencies to CFE’s network.”
About FreeWave Technologies
Founded in 1993, FreeWave Technologies manufactures the most reliable, high performing, lowest power consumption, spread spectrum and licensed radios for mission-critical data transmission. Through engineering excellence and a relentless commitment to best-in-class manufacturing, FreeWave customers enjoy superior radio up-time, range and the lowest cost of ownership available. Based in Boulder, Colorado, FreeWave designs and manufactures radios that are the leading choice for oil and gas, utility, military and numerous other industrial applications. Organizations that count on radio data communications for operational success – where failure and down-time are not an option – trust FreeWave for custom network design, system engineering and customer support that are unparalleled in the market. For additional information, contact FreeWave directly at 866.399.4930 or at firstname.lastname@example.org. Visit the company’s website at www.freewave.com.
303-581-7760 ext. 19